sql

Separator Machine HJM 097 SP 100 - 150 Kg/Hour

Rp. CALL
Last Updated
07 Mar 2022
Minimum Order
1

Specification of Separator Machine HJM 097 SP 100 - 150 Kg/Hour


Model: HJM 097 SP

Length: 1800 mm

Width: 800 mm

Height: 1500 mm

Capacity: 100-150 Kg / Hour

Mover: E.Motor 2 Hp

Fuel: Electricity



Separator is a pressure vessel that is used to separate the well fluid into water and gas (three-phase) or liquids and gas (two-phase), where the separation can be done in several ways:

a. The principle of pressure reduction.

b. Gravity SetLink

c. Turbulence or change the direction of flow

d. Breakdown or collision fluid



To mendapaktkan stable job efficiency with varying conditions, gas liquid separator separator must have the following components:

1. The first separator, serves to separate the liquid from the incoming fluid flow quickly in the form of drops of oil to a large size.

2. Section collector fluid, serves to separate the small liquid drops to the principle of gravity SetLink.

3. The second separator, serves to separate the small liquid drops to the principle of gravity settlink.

4. Mist extraktor, serves to separate the liquid drops is very small (fog).

5. Equipment control, serves to control the separator work primarily on the condition of over pressure.



In block station, in addition there is a separator separator combined are also separator test function for testing (test) production of the well and from the separator test is the production rate of the well (Qo, QW, danQg) may be obtained where Qo and QW obtained from the barrel meters while Qg obtained from recording orifice flow meter (orifice plate) or from other gas stream recording device.


Lihat Selengkapnya

Untuk keterangan lebih lanjut, silahkan download PDF ini :

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Request a Quote
Produk Siap di Pesan
Rp 0
1